Getting It All Together!

It’s still really hot.  Really, really hot.  So I am spending as much time downstairs where it is very cool, which is good, because I am getting lots done!  I finished stitching all of my blocks together…I must say I am thrilled with how wonderful the assorted pinks and greens go together.  I mean, when you veer away from the original quilt (Sue Garman’s quilt is made up of various red and greens) you really never know what you are going to end up with!

For those of who who have inquired, yes you can still sign up for Bed of Roses.  In fact, you can order one block at a time and work at your own pace, or you can order a few blocks at a time, or you can even order the complete set (which is your best bet to save on all that shipping!)

DSCN7952

DSCN7951

I mentioned a few posts ago that I will be teaching two(!) classes at Barbara Blanton’s Academy of Applique.  What an honour!!  The catalogue of classes is now online so you can check it out here.  Here are my class samples.  I urge everyone who is even remotely interested in applique to consider taking a class at the Academy.  Don’t worry if you don’t know too much about applique….that is why you are taking classes….to learn more!  And if you are worried about going alone and not knowing anyone, well, stop worrying about that!  The Academy of Applique is the place to be if you want to meet fellow appliquers and maybe even make some lifelong friends.

DSCN7897

DSCN7898

I am gearing up for the new BOM which starts September 1.  You can check that post out here.  That means you have exactly 10 days left to order! So if you want in on this BOM, you’ll have to order soon.  We will be starting with The Woven Flower Basket.  You will receive the pattern, the same fabrics I am using, a Color Chart so you will know which fabrics go where (handy!) and I will be doing a very detailed blog post to share the tips and techniques I am using.  I hope you will join me in making this awesome (but very doable!) quilt.

I started working on the first block yesterday, so I just wanted you to get a sampling of what the detailed blog post will look like.

OK…here we go….First I started by taping the pattern together.  You can make a personal photocopy (for your use only) so that you have a master copy.  You never know, you want to make these blocks more than once.  Next, I traced the pattern onto the background with a clover Water Soluble Marker (the thick one).  Take note that I only trace the outlines of a design and I don’t trace the inside detail.  Once you place the first unit on the background, you will cover up the inside markings.  And you will say to yourself… “Well, I just wasted my time tracing things that didn’t need to be traced”.  Trust me.DSCN7964

So I was laying in bed the other night thinking about baskets.  Specifically, baskets that are made from strips of bias.  And the fact that they are usually appliqued right onto the background.  And I wondered…”Where are the stems?  If the basket shows the background, shouldn’t I see stems.”  So then I thought…”I wonder what it would look like if I  added a layer of fabric to the background, and then applique the bias strips on top of that.  And then the stems would be “in” the basket”.  So that is what I did.  Which is why I did not trace the stems onto the background (just in case you were wondering haha!).

DSCN7963

Maybe you have never made bias strips before.  You probably think it is really difficult.  Well, I am here to show you how easy it really is.  First, you lay your ruler on the edge of the fabric so that the 45 degree line is lined up with the edge of the fabric.  It should look like this.   Here is a post you can read about how I make my bias stems.

DSCN7957

By the way, we are cutting our bias strips on a 45 degree angle.  Each one of those lines on your ruler represents a different angle, so make sure you are using the correct line

DSCN7962

When I cut my freezer paper template for the light blue piece, I did not include any seam allowance along the sides, but I did include it on the top and bottom.DSCN7965

Next, I removed the freezer paper template and traced the stem lines from the paper pattern.

DSCN7966

DSCN7967

Then I glued the light blue piece in place making sure the top and bottom were lined up properly.

DSCN7970

Now I am ready to glue the strips in place.  You will notice that there is a bit of “over and under” going on with the stems so you’ll have to pay attention.  Clearly I wasn’t  paying attention, so I had to loosen the glue a little, but now it’s all good!!

DSCN7972

DSCN7974

Yes…..it’s all good!DSCN7977

Til next time….

Kerry

Now I Can Relax!!!

The contracts are signed.  The patterns are designed. I have stitched my class samples and submitted class descriptions and supply lists.  Now I can finally tell you my exciting news…..I will be teaching two classes at Barbara Blanton’s Academy of Applique!   Pinch me!  I must be dreaming, but the last time I checked, my photo is up there with some pretty amazing world-class teachers, so it must be true!

DSCN7915

As much as I would love to show you my class samples, the teachers have been asked to keep their samples under wraps until the catalogue is published.  Sorry, but this is all I can show you…

DSCN7896
Anyway, now that my samples are finished,  I can finally start to put my Bed of Roses together.  I must confess, I have not finished all of the side triangles (or borders).  But I do have enough that I can get going!  I also know that once I see a few blocks stitched together, I will be very motivated to get things finished.

Ok, so I want to show you how to trim the side triangles and corner triangles.  The instructions are written very clearly in the pattern, but I just wanted to give you a few pointers.

Cut 2 pieces of freezer paper 15″ square.  Cut one of the pieces on the diagonal to end up with 2 triangles.

DSCN7900

Next, cut the second piece of freezer paper on the diagonal twice to end up with 4 smaller triangles.  So far, so good!

DSCN7901

So let’s start with the smaller triangles.  Basically, we are going to iron a freezer paper triangle (FPT) on to the right side of the 4 corner triangles.  First, I placed the FPT on the paper pattern and traced a few leaves, just to make sure I could line the pattern up and everything would be centered.

DSCN7902

Next, I ironed the FPT on top of the stitched triangle, placing the drawn leaves directly over the stitched leaves.

DSCN7903

It should look something like this.  As you can see, I am doing both triangles at once.

DSCN7904

Now, we are going to machine stitch 1/8″ away from the FPT, just on the bias edge.

DSCN7905
This next part is super-important, so if you remember only one thing from this post, make sure it is this!  The FPT does not have any seam allowance included, so you must add 1/4″ seam allowance to the fabric.

DSCN7908

Once the triangle is trimmed, you can remove the FPT.

DSCN7909

So now you can repeat the same process  with the remaining 3 corner triangles.  Then you can trim down the 8 side triangles, but this time you will be using the larger FPT.   Sometimes it is hard to tell what Bruin is thinking, but I think he is pretty impressed!!

DSCN7913

Til next time….

Kerry