Third block of “Love Is In the Air”

Yesterday afternoon I started to prep the third block in “Love Is In The Air” a pattern designed by Lori Smith.  I thought the blocks were a tad small (8 1/2″), so I enlarged them 125%.  I cut my background blocks 15″ square and I will trim them down slightly when I decide what kind of sashing to make.  I love working on a quilt this way.  So many unknowns and so many possibilities!!

I am using a fat quarter bundle of shirtings for the backgrounds (each square will have a different background).  And I am trying really hard to make this quilt as scrappy as possible.  Very liberating!

Like most blocks, it all started with the stems and leaves…..

DSCN7630

…..and then a pretty flower!

DSCN7631

I love using as many greens as I possibly can for the leaves.  I try to include as many different patterns and textures as I can.

DSCN7636

The whole time I was prepping all the leaves and buds, I was worrying (yes worrying!) about what kind of fabric I should use for the vase.   The vase fabric shouldn’t be the focal point of the block, but it shouldn’t disappear into the background, either.  I searched until I found a fabric that I think fit the bill.

DSCN7638

And here is the prepped block waiting to be stitched!

DSCN7639

So far, so good!

DSCN7640

I have been making some pretty steady progress on my hexie quilt.  I am hand quilting it with the Baptist fan design.  So relaxing!!

DSCN7624

Til next time….

Kerry

Advertisements

Save those scraps!

I have been working away on the second block of “Love is in the Air” a pattern designed by Lori Smith.  I purchased this pattern a couple of years ago and put it away with the rest of my patterns.  Honestly, I forgot all about it.  About a month ago,  I went through my patterns and books in search of a simple applique pattern that would lend itself to a really scrappy feel.  As soon as I “found” this pattern in my box of (far too many) patterns, I knew “Love is in the Air” was exactly what I was looking for!  For those of you who may want to stitch these blocks along with me, the pattern is available here.

As I mentioned in my last post, I am using a collection of shirting for the backgrounds, so that means that each background square will be different, which I am not going to lie has me a little unsettled.  But I do love a challenge!

Also, I enlarged the patterns by 125%.  I cut my background squares 16″ x 16″, but I am not sure right now what size they will end up.  I never have all the details figured out before I start a quilt….what fun would that be?   Sometimes you have to listen to the quilt!

I started this block by tracing the pattern onto the background with a water soluble marker.  Next, I made a bunch of leaves, using many different fabrics, just for the fun of it and then I auditioned them.  Some I like.  Some I don’t.  Some of the leaves are competing with the background, so I will save those leaves for another project!

DSCN7454

DSCN7455

OK, next I added my stems.  Notice I used the same fabric for all of the stems, just to give a bit of consistency.

DSCN7457

Next, I went searching through my scraps and I found this piece of fabric I have had for about 8 years.  I love this fabric!  So I decided to use it for the 4 main flowers.

DSCN7463

Then I went through my scraps and found a fabric that went with the flower fabric.

DSCN7461

Next, I went through my blues and golds and chose a few fabrics that played nicely with the main flower fabric.   So far, so good!

DSCN7464

DSCN7466

This patterns has a circle in the centre that I could make with a piece of bias and  a 1/4 bias maker, but I chose to make a template instead and prep it in the way I prep all of my templates.  So much easier!  Instead of tracing the circle from the pattern, I used a compass to get a more accurate shape.
DSCN7467

I cut the circle out and ironed it to the wrong side of the fabric.  I decided not to cut the centre of the fabric out just yet, to keep it more stable.

DSCN7468

Using starch, a stiletto and a mini-iron, I prepped the outside edge.

DSCN7469

Next, I trimmed out the centre and prepped the inside edge.

DSCN7470

Taking the freezer paper out is always fun (and kind of scary!) but it works like a charm every time!

DSCN7477

DSCN7478

Once it is glued in place, it looks very neat and tidy.  Whew!!

DSCN7479

So, I auditioned several fabrics for the centres of the main flowers…brown, black, burgundy, blue…nothing appealed to me.  Then I tried gold.  Gold it is!!  But wait….

DSCN7481

I thought the gold circles were a tad too big, so I made them a shade smaller.

DSCN7486

Ahhhh.  That’s much better!

DSCN7484

Here’s a fun fact… I used three different golds in this block.  After all, it is a scrappy quilt!

DSCN7488

And here are both blocks.  Sweet!

DSCN7487

Keeping with the scrappy theme, I am working away on Trail Mix, a quilt designed by Laundry Basket Quilts.  I chuckled when I saw this block.DSCN7451

In this block alone, there is a scrap from my hexie quilt I worked on last winter,

DSCN6717

DSCN6995

…a scrap of the background of my Civil War Bride Quilt….

DSCN4727

DSCN6141

….and a piece of the background of my Reminescence.  Memories!

detail of Rem.

Til next time….

Kerry

Trail Mix Progress and a new project!

I have been making steady progress on my Trail Mix quilt, designed by Laundry Basket Quilts. I must say it is rather addictive cutting and stitching all those tiny little pieces.   Sometimes when I start a new quilt, I set up some rules or guidelines for that quilt.  The rule for this quilt is that I can only use fabrics I have on hand.  It certainly is a nice feeling to use the last bits of some of the fabrics I have had for…well, a really, really long time!!!

Ok, so, you make 4 of these units….

DSCN7428

…..and stitch them onto these scrappy blocks.

DSCN7424

Here is the first one which fit like a glove!

DSCN7425

Here are the second and third units….

DSCN7427

I was absolutely delighted when the fourth unit actually fit where it was supposed to without any puckers or pleats!  One down, eight more to go.  Yikes!

DSCN7430

So, keeping that scrappy theme, I have started a new applique project that will also have a scrappy feel.  The pattern I am using is “Love is in the Air” by Lori Smith.   I enlarged the patterns by 125% to make the blocks bigger than the original size (8 1/2″).  I am also going to make a scrappy sashing, but more about that later!

DSCN7450

For my background fabrics, I am also going with a scrappy look.  I have had this collection of shirtings long enough.  It is now time to use them up!  I’m going to use a different background for each block.  Can’t wait to see what that looks like!!

DSCN7449

I started this block like I start all of my applique blocks, I traced the pattern with a blue Clover water soluble marker.  Then I made some bias for the stems (using my 1/4″ bias maker) and I started to make some leaves.  When I do go fabric shopping, I am always on the look out for green fabrics (especially olive greens) that would make awesome leaves.

DSCN7432

DSCN7433

DSCN7435

Next, I chose the fabrics for my flowers.

DSCN7436

Each flower has a “bud” and so I chose this darker purple (on the right) as the bud.  I thought there was enough contrast….

DSCN7438

…but, as you can see, there really isn’t much contrast.  Unfortunately, the bud gets lost.

DSCN7437

So, I opted for a darker, more tone-on-tone bud for both of the flowers.  So far, so good!

DSCN7440

Next came the tail feathers for the bird.

DSCN7442

DSCN7443

DSCN7444

And finally, the rest of the bird!  Do you recognize the blue fabric I used for the bird body?  It is the same fabric I used in my Mom’s quilt.  You can read that post here.

DSCN7447

Til next time……

Kerry