Setting the Table

For some reason, this block seemed to be taking a long time!  Finally, it’s finished!

The first thing I did was change the carpet.  I wanted the tablecloth to be the focus of this block.  The first fabric I used for the carpet fought with the fabric for the tablecloth, so I changed it.  Maybe it’s because they both read as “mediums” or maybe it’s because they are both “busy”.  Either way, it just wasn’t working!   I prefer to audition a few (or more!) fabrics until I find the one that screams “I am the one!”

Out with the old…

DSCN3998

…in with the new!

table 2 (2)

Next, I  added the bottom layer of the tablecloth.  I did not need to make another template, I just used the one from the original tablecloth.  Of course, it didn’t have to be the full size, so I just used what I needed.

same pattern

Then, I added the vase, some vines and a couple of apple stems.  The fabric for the vase is from a line called “Maid of Honor” by Bonnie Sullivan and Maywood Studios.  It actually looks like cracked pottery!

table 4 (2)

Lots of leaves followed, along with a couple of apples. Or are they peaches?

table 4 (1)

This morning I embroidered the cherry stems…

table 6 (2)

…and yippee!  This block has just had a bubble bath and is resting comfortably!!

block 7

Til next time…

Kerry

I See Table Legs!

Every quilter looks at fabric differently.  Some see color, some see patten and some see possibilities!

When I started thinking about choosing fabrics for the next block of Civil War Bride, I wanted to do something really special for the table legs.  I searched high and low through my stash and this is what I found!  Do you see the table legs?

tb1

First, I measured the width of the stripe I wanted to use.

measure 3

Then I measured the pattern.  Pretty close!

measure 2

So I cut the freezer paper templates out and placed them very carefully on the wrong side of the fabric.

tb5

Since I will be using one of Karen Kay Buckley’s “Perfect Circles” for the round part, I am just cutting straight pieces for the legs.

tb4

Here are the legs.

tb6

Moving right along to the table cloth!  This is how I traced the tablecloth.  First I traced just half of the pattern on the freezer paper.

tb9

I folded it in half and cut along the line.  Call me crazy, but I like when both halves of a pattern are exactly the same!

tb10

Next, I ironed the pattern on the back of the fabric making sure that the pattern was centered.  I wanted the red stripes to be at each end of the table.

DSCN3997

…and here we go!  There is still a piece that goes under the tablecloth, I just have to choose a matching fabric!

DSCN3998

Til next time….

Kerry

Another block…another nest!

Time to start another block of Civil War Bride.  I almost(!) have enough blocks to sew another row together!!  And you know how excited I get when I can stitch another row together.  So here we go…

First I prepped the branches and stitched them in place.  I used a brown fabric with shocking pink little flowers on it just to give the block a bit of oomph!  (Definition of oomph…An extra push. An ingredient or a factor that will make something better or perfect.)

a

Next, came the leaves and the nest.  Do you recognize the nest?  You may have seen it here.

c

So, keep this tip in mind if you are making this quilt.  You can make a couple of nests, audition them both, and use both!  Waste not, want not and all that jazz!

Then, I placed a bird in the branches.

d

I really like to use Ultra-Suede for the feet and the beaks.  First, I cut 2 triangles for the beaks.  You don’t have to include a seam allowance, except for the part that goes under the body.

h

I glued  half of the beak in place then trimmed a tiny bit of the corner off.

j

Then I glued the other half of the beak in place.  I trimmed  a bit of the corner off, also, so that the triangles  would not overlap.  Ultra-Suede is rather thick!  Finally, I put the bird fabric back in place and stitched it in place,  stitching right through Ultra-Suede, and into the background.

k

On to the feet!  I ironed the freezer paper templates onto the Ultra-Suede.  I am not really sure if there is a wrong side or a right side. They both look good to me!

l

So I cut the feet out and  placed them under the body.  At this point, the entire body has not been stitched in place yet. When I stitch the Ultra-Suede in place I try to match the color of the thread as closely as I can.  I take just a tiny “bite” of the Ultra Suede and (very important) I don’t pull the thread too tight.  If I do, then the Ultra-Suede looks dimpled along the sewn edge.

m

Since I wanted this to be a male bird, I added a golden brown wing and tail.  Very manly!

n

I wanted the second bird to be female, so I chose a pretty fabric for her body and a nice red feather and tail.  I added the eggs to the nest and…Voila!

block

Til next time…

Kerry

Parallel and Perpendicular

I was raring to go!  I finished another 4 blocks of Sue Garman’s “Friends of Baltimore”, which meant I was ready to stitch together another row!  But first I had to add the embroidery to the schooner.

Before the embroidery…

schooner 1

…and after the embroidery!

schooner 2

Once all the ropes were stitched in place, I started to “square up” my blocks.  When I say “square up” I mean any straight lines are running parallel and perpendicular to the edges of the block.  Here are a few (hopefully!) helpful hints…

First of all, if you have ever wallpapered, you know that before you start, you have to use a plumb line to make sure you begin with a straight line.  The same holds true for squaring-up a block.  First you have to find a straight line somewhere in the block.  It sounds easy, but there are no straight lines on this block!

block 1

So…using the schooner block as an example…here are my thoughts!

Luckily, there are some pretty obvious straight lines in this block.  The masts!  So, I want the masts to be parallel to the edge of the block.

trim 1

Next,  I placed my window template on the block.  You can read more about that here.

So, I measured the distance from the bottom of the mast to the template.

trim 2

Then I measured the distance from the top of the mast to the template.  Both of those measurements need to be the same!

trim 3

Then, I took my 6″ ruler and made sure that there was an equal distance from the applique to the template on both sides..

trim 4

trim 6

…and top and bottom.

trim 8

trim 7

When I was sure the block was square and centered..(and I mean really sure!)  I marked  along the inside of the template with a marking pen and then I cut on the line with my rotary cutter and ruler.  Easy peasy!

So, once the blocks were trimmed, I started to sew the row together.

rows 1

And, finally, 3 rows sewn together!

rows 2

Til next time…

Kerry

New legs for a peacock!

If  you have some time on your hands on Saturday, June 15 at 10 am, come on down to Elite Quilting in Barrie, Ontario where I will be doing a demo of the starch and freezer paper method of hand-applique.  The cost is $10.00.   Colleen will also have all the supplies on hand for you purchase so you can go home and practice this method.  Hope to see you there!

Back to the block!  I must admit, I was a little alarmed how freakishly out of proportion the birds legs looks!  So I gave the peacock some new legs.  I like to use Ultra-Suede for the birds legs and beaks when they are just too darn tiny to applique!

legs

Once the legs were stitched in place, I used a Micron marker on the edge of the Ultra-Suede to hide the stitches and add a bit of definition.

legs 2

Once I felt better about his legs, I added the stems.

stems

Next, some leaves and a bud.

stems leaves and bud

And, finally, the rest of the leaves and the flowers!  Spiffy!

finished block

I finished hand-quilting another block from Sue Garman’s “Bouquets for a New Day”.  (Only 3 more blocks to go!  Yippee!)  The vase was very baggy!

baggy vase

So, just like the vase in the last block, I needed to add some quilting to the vase to make it…un-baggy!  After much debate, I decided to do the same cross-hatching as in the background of the block, except I did the stitching in red thread.  Voila!

cross-hatched vase

Til next time…

Kerry

Inspiration….gotta love it!!

Last Sunday, my Sunday Afternoon Applique Group met to chat, stitch and eat. The best part about getting together with other appliquers is that we feed off each others creativity and, best of all, we inspire each other.  This month we were super- inspired by Lynne.  Lynne started “Flower Garden” by Kim McLean last September and brought it this month for Show and Tell.  Awesome!

lynne quilt

Since my sewing machine was out (and I had already taken over the dining room table!) I thought it would be a good idea to do a few more blocks of Barbara Brackman’s Grandmother’s Choice.  This block of the week is a great stash-buster!  I am starting to think about which settings I will use to put the blocks together.  So many choices!  Even if you aren’t making the blocks, I recommend reading the stories that accompany each block.  You will realize how far we have come, baby!

This block is called Nonsense.

DSCN3860

This is called Endless Stairs.

DSCN3859

This is called Art Square.

DSCN3858

And, this is called Nameless Star.

DSCN3857

Moving right along, I started to work on the next block of Civil War Bride.  This block has the peacock in it and I wanted it to stand out in a very regal way!  I went searching in my stash and just couldn’t find anything that said “peacock” to me.  I went searching in my friends’ stash and this is what I found!  Oh…the possibilities!

DSCN3877

First I started with the body.

DSCN3861

Then I added the tail section.

DSCN3862

And now comes the fun part!  I love fabrics that beg to be fussy cut!  I thought these medallions would make awesome feather details.

DSCN3863

I used Perfect Circles by Karen Kay Buckley to make the circles.  You can read more about Perfect Circles here.

DSCN3866

So I stitched on a few circles and liked the effect…

DSCN3873

…so I  added some more!

DSCN3874

Next, I added some legs and a place for the peacock to stand!

DSCN3875

Til next time…

Kerry

Itching to finish!

I was just itching to get this next block of Sue Garman’s “Friends of Baltimore” finished!  But it just seemed to go on and on.  I started working on the red ribbons.  As you can see, this section of the ribbon was really skinny!  Here is how I tackled it.  Even though the freezer paper template was barely an 1/8″ wide, I still cut my 1/4″ seam allowance all the way around.

block 4

Once I prepped the first side, I trimmed the seam allowance so that I could  just see the edge of the template.

block 6

Next, I prepped the other side and trimmed it down also…

block 7

…and stitched it in place.

block 2

Then I prepped and stitched the second ribbon in place and added a pretty bow.

block 3

I thought I was done (and was high-five-ing myself!) and realized, no, I still had the bluebird to stitch.  So, here is the finished block…all tidied up after it’s bubble bath!

block 1

I took a close look and saw that,  once again, I forgot to stitch a tiny piece.  Drat!

oops (2)

Now, on to the exciting part!  The reason I wanted to finish this block so much, is that I now have enough blocks to sew another row together…I know!!!  So I dusted the cobwebs off my sewing machine, and started to make some half-square triangles.  You can read a little more about the method I use here.

It’s one thing to sit and sew a bunch of half-square triangles together.  It is another thing entirely to stitch them together in a row and arrive at the measurement it is supposed to be.  Here is a little tip I use to make life easier.

First, I sew my half-square triangles (HSTs) together in pairs.  Then I press the seam open.

stitched togethe in pairs

Then I stitch the pairs together to make sets of 4.  And I press the seam open.  And then, I measure the piece.  These HSTs finish at 1″, therefore, 4  HSTs sewn together should measure 4 1/2″.

four and a half

Then I stitch the sets of 4 together to make sets of 8.  I press the seam open and measure the piece.  It should measure 8 1/2″.  This section needed a nip and tuck!

eight and a half

Now, I take my sets of 8 and stitch them together to make 16 HSTs.  And, hopefully, it measures 16 1/2″.

sixteen and a half

So, now I can start to sew the row together!   Bruin always likes to be in on the action!

bruin helping

First, I sewed on  the bottom sashing, and then the side sashing on both blocks.

bottom and sides

And…two blocks sewn together!

2 rows sstitched together

I would like to continue, but look at the time!

nine o'clock

Keep stitching…

Kerry

Echo Quilting

Every night around 9 pm, I stop whatever I am doing and take my usual place on the couch and hand-quilt for an hour or two.  It isn’t a lot of time, but it sure adds up and I am making some  steady progress on Sue Garman’s “Bouquets for a New Day”.

The block I am working on needed a bit of extra-special quilting.  The  cross-hatching in the background causes anything that isn’t quilted to puff out and look baggy…like the vase.

baggy

I am using beige quilting thread for the background.  When I am quilting on top of a shape, I like to match the color of the thread to the color of the fabric.  If I can’t find the color I am looking for in  Dual-Duty quilt thread or YLI quilt thread, I use Mettler 40 weight, which is a machine quilting or hand-quilting weight thread.  Mettler 40 weight does not have a coating on it like true hand-quilting thread.  So, to make the thread glide through the fabric easier and to protect it from knotting and shredding, I use Thread Heaven.

thread and thread heaven

First I quilted around each point of the star, and then surrounded it with Echo Quilting.

echo quilting

And here is the finished block!

quilted block

Til next time…

Kerry

A good day…considering!

Exciting times!  Earlier this spring, a dove built a nest and laid some eggs in a tree that is visible from our front window.  Last weekend, my husband was trimming the bushes around the tree and noticed the Mama bird keeping her 2 baby birds warm.

mom and baby

On Thursday, I noticed a bit of commotion around the tree (and our cat was going crazy!)  Good thing he is an indoor cat!  The baby birds were finally leaving the nest!  I made sure my still-living-at-home, recently graduated 21 year-old daughter was paying close attention!  Here is the Mom and Dad and one of the babies.

mom dad and baby

The other baby is over here, maybe in a time-out?

2nd baby

Anyway…back to the block!  I added a few more flowers and leaves…

a few more flowers 1

flowers 2

Next, it was time to make the vine.  First I ironed the freezer paper to the wrong side of the fabric.  I trimmed just one side of the vine.

vine 1

I prepped one side…

vine 2

…then, I trimmed the other side.

vine 3

I finished prepping the vine, removed the freezer paper and added a few dabs of glue….

vine 5

…..and added it to the bouquet!

vine 6

In the meantime, I  noticed that I had forgotten a little bud in the top right hand corner of the bouquet.  So I prepped the missing bud, and also the blossom that goes at the end of the vine.  And stitched them in place.

Here is the missing bud…

oops 2

…and the blossom at the end of the vine.  Spiffy!

vine 7

I must confess, I did not look at the pattern, and mixed the two pieces up.  I did not think it mattered….keep reading!…

So once all flowers and vines and leaves stitched in place, it was time to make the stems.  I used bias bars to make them and used 4 different fabrics.  I did not want to glue all the stems in place before stitching them, so I glued and stitched a few at a time.  I took a few minutes and traced the stems so I wouldn’t have to keep putting the background back on the lightbox.

stems 1

I added a few more stems and stitched them in place…

stems 2

…voila!

stem 3

Next, I added the leaves.  So far, so good!

leaves

I was pretty impressed with myself (which usually means I have screwed up somewhere!) and started prepping the ribbon.  I put the pattern back on the light box and started to glue the ribbon in place.  Yikes!  Good thing I keep the stitch ripper handy!

yikes

Ah….that’s better!

better

Til next time…

Kerry

Voo-doo dolls and other interesting tid-bits…

Now that I have the majority of the pieces prepped and pinned to a piece of styrofoam sub-floor, I am ready to start building my block on the background.  As you can see I used a lot of pins to hold my pieces in place.

prepped

Each time I stuck a pin into the styrofoam, I thought about voo-doo dolls.

Voodoo_doll_Wallpaper_zmary

(Sometimes its really hard to stay focused!)   According to wikipedia, the most popular stereotype of using a voo-doo doll involves sticking pins into it.  But did you know that there are different emotions and feelings attached to the color of pins that can be used?  I did a bit more research and found out that yellow pins means  money and blue pins mean love!  Check out the color of my pins!

OK…where was I?

I made another copy of the pattern and taped it to the light box.  Then, I placed a background square on the pattern and put a few (yellow!)  pins in it.  Next, I took a water-soluble marker and traced the seam lines on the background.

seam lines traced

This block has lots of pieces so I won’t be gluing all the pieces in place before I start to stitch.  I like to glue a few pieces in place, stitch them, and then glue a few more pieces in place.  So, I will be unpinning  the background square from the pattern, stitching, and then I will be placing it on the pattern again.  I use the traced seam lines as a guide to make sure everything is lined up properly.

It can be a little confusing trying to figure out which pieces go where.  First I start with the stems.

stems

Then I add a few pieces.  I usually start at the outer edge and work inwards.

stems and flowers

stems and flowers 2

So far…so good!

Til next time…

Kerry