I See Table Legs!

Every quilter looks at fabric differently.  Some see color, some see patten and some see possibilities!

When I started thinking about choosing fabrics for the next block of Civil War Bride, I wanted to do something really special for the table legs.  I searched high and low through my stash and this is what I found!  Do you see the table legs?

tb1

First, I measured the width of the stripe I wanted to use.

measure 3

Then I measured the pattern.  Pretty close!

measure 2

So I cut the freezer paper templates out and placed them very carefully on the wrong side of the fabric.

tb5

Since I will be using one of Karen Kay Buckley’s “Perfect Circles” for the round part, I am just cutting straight pieces for the legs.

tb4

Here are the legs.

tb6

Moving right along to the table cloth!  This is how I traced the tablecloth.  First I traced just half of the pattern on the freezer paper.

tb9

I folded it in half and cut along the line.  Call me crazy, but I like when both halves of a pattern are exactly the same!

tb10

Next, I ironed the pattern on the back of the fabric making sure that the pattern was centered.  I wanted the red stripes to be at each end of the table.

DSCN3997

…and here we go!  There is still a piece that goes under the tablecloth, I just have to choose a matching fabric!

DSCN3998

Til next time….

Kerry

Itching to finish!

I was just itching to get this next block of Sue Garman’s “Friends of Baltimore” finished!  But it just seemed to go on and on.  I started working on the red ribbons.  As you can see, this section of the ribbon was really skinny!  Here is how I tackled it.  Even though the freezer paper template was barely an 1/8″ wide, I still cut my 1/4″ seam allowance all the way around.

block 4

Once I prepped the first side, I trimmed the seam allowance so that I could  just see the edge of the template.

block 6

Next, I prepped the other side and trimmed it down also…

block 7

…and stitched it in place.

block 2

Then I prepped and stitched the second ribbon in place and added a pretty bow.

block 3

I thought I was done (and was high-five-ing myself!) and realized, no, I still had the bluebird to stitch.  So, here is the finished block…all tidied up after it’s bubble bath!

block 1

I took a close look and saw that,  once again, I forgot to stitch a tiny piece.  Drat!

oops (2)

Now, on to the exciting part!  The reason I wanted to finish this block so much, is that I now have enough blocks to sew another row together…I know!!!  So I dusted the cobwebs off my sewing machine, and started to make some half-square triangles.  You can read a little more about the method I use here.

It’s one thing to sit and sew a bunch of half-square triangles together.  It is another thing entirely to stitch them together in a row and arrive at the measurement it is supposed to be.  Here is a little tip I use to make life easier.

First, I sew my half-square triangles (HSTs) together in pairs.  Then I press the seam open.

stitched togethe in pairs

Then I stitch the pairs together to make sets of 4.  And I press the seam open.  And then, I measure the piece.  These HSTs finish at 1″, therefore, 4  HSTs sewn together should measure 4 1/2″.

four and a half

Then I stitch the sets of 4 together to make sets of 8.  I press the seam open and measure the piece.  It should measure 8 1/2″.  This section needed a nip and tuck!

eight and a half

Now, I take my sets of 8 and stitch them together to make 16 HSTs.  And, hopefully, it measures 16 1/2″.

sixteen and a half

So, now I can start to sew the row together!   Bruin always likes to be in on the action!

bruin helping

First, I sewed on  the bottom sashing, and then the side sashing on both blocks.

bottom and sides

And…two blocks sewn together!

2 rows sstitched together

I would like to continue, but look at the time!

nine o'clock

Keep stitching…

Kerry

A good day…considering!

Exciting times!  Earlier this spring, a dove built a nest and laid some eggs in a tree that is visible from our front window.  Last weekend, my husband was trimming the bushes around the tree and noticed the Mama bird keeping her 2 baby birds warm.

mom and baby

On Thursday, I noticed a bit of commotion around the tree (and our cat was going crazy!)  Good thing he is an indoor cat!  The baby birds were finally leaving the nest!  I made sure my still-living-at-home, recently graduated 21 year-old daughter was paying close attention!  Here is the Mom and Dad and one of the babies.

mom dad and baby

The other baby is over here, maybe in a time-out?

2nd baby

Anyway…back to the block!  I added a few more flowers and leaves…

a few more flowers 1

flowers 2

Next, it was time to make the vine.  First I ironed the freezer paper to the wrong side of the fabric.  I trimmed just one side of the vine.

vine 1

I prepped one side…

vine 2

…then, I trimmed the other side.

vine 3

I finished prepping the vine, removed the freezer paper and added a few dabs of glue….

vine 5

…..and added it to the bouquet!

vine 6

In the meantime, I  noticed that I had forgotten a little bud in the top right hand corner of the bouquet.  So I prepped the missing bud, and also the blossom that goes at the end of the vine.  And stitched them in place.

Here is the missing bud…

oops 2

…and the blossom at the end of the vine.  Spiffy!

vine 7

I must confess, I did not look at the pattern, and mixed the two pieces up.  I did not think it mattered….keep reading!…

So once all flowers and vines and leaves stitched in place, it was time to make the stems.  I used bias bars to make them and used 4 different fabrics.  I did not want to glue all the stems in place before stitching them, so I glued and stitched a few at a time.  I took a few minutes and traced the stems so I wouldn’t have to keep putting the background back on the lightbox.

stems 1

I added a few more stems and stitched them in place…

stems 2

…voila!

stem 3

Next, I added the leaves.  So far, so good!

leaves

I was pretty impressed with myself (which usually means I have screwed up somewhere!) and started prepping the ribbon.  I put the pattern back on the light box and started to glue the ribbon in place.  Yikes!  Good thing I keep the stitch ripper handy!

yikes

Ah….that’s better!

better

Til next time…

Kerry

Voo-doo dolls and other interesting tid-bits…

Now that I have the majority of the pieces prepped and pinned to a piece of styrofoam sub-floor, I am ready to start building my block on the background.  As you can see I used a lot of pins to hold my pieces in place.

prepped

Each time I stuck a pin into the styrofoam, I thought about voo-doo dolls.

Voodoo_doll_Wallpaper_zmary

(Sometimes its really hard to stay focused!)   According to wikipedia, the most popular stereotype of using a voo-doo doll involves sticking pins into it.  But did you know that there are different emotions and feelings attached to the color of pins that can be used?  I did a bit more research and found out that yellow pins means  money and blue pins mean love!  Check out the color of my pins!

OK…where was I?

I made another copy of the pattern and taped it to the light box.  Then, I placed a background square on the pattern and put a few (yellow!)  pins in it.  Next, I took a water-soluble marker and traced the seam lines on the background.

seam lines traced

This block has lots of pieces so I won’t be gluing all the pieces in place before I start to stitch.  I like to glue a few pieces in place, stitch them, and then glue a few more pieces in place.  So, I will be unpinning  the background square from the pattern, stitching, and then I will be placing it on the pattern again.  I use the traced seam lines as a guide to make sure everything is lined up properly.

It can be a little confusing trying to figure out which pieces go where.  First I start with the stems.

stems

Then I add a few pieces.  I usually start at the outer edge and work inwards.

stems and flowers

stems and flowers 2

So far…so good!

Til next time…

Kerry

A Productive Day!

It is not very often that I sit at my sewing machine and stitch the day away, but that is what I did yesterday!  I cut out and stitched…get ready….12 blocks from Grandmother’s Choice Block of the Week!  My plan is to make 3 quilts using these 8″ blocks, so I am stitching 3 variations of the same block.  I love to see how different fabric placement can drastically change the look of the block.  Here are the blocks:

This block is called “I Am An Anti”.  Honestly, I did not fussy cut the pink squares on purpose.  It just happened!

DSCN3595

Next on the runway is “Carrie Nation”.

DSCN3596

Followed by “Mr. Roosevelt’s Necktie”.

DSCN3597

And, last but not least, is “Jack’s Delight”.

DSCN3598

Jenny and Bruin like to keep me company when I sew.  They are kind of  famous!  Check out their youtube video here.

bruin

jenny and bruin

This is my latest finished block from “Bouquets For a New Day”. 5 more blocks to go!

bfand 1

The navy blue fabric in the vase is left over from an Irish Chain quilt I made for my Mom.

irish chain

Most of this block from “Civil War Bride” is stitched in place.  I started to think that maybe the table that the vase is sitting on is too dark for the overall look of the block.  So I cut out another table piece and auditioned it.  I do like it better.

cwb 1 (2)

My #1 rule in applique (and life) is this….fix something while it’s in the block stage, rather than finish the whole quilt and kick yourself because you were too busy…or too tired…or too lazy to fix it!  I have been guilty of all 3!

Til next time…

Kerry

A Good Way to Spend the Evening!

It was going to be a very exciting evening!  I have completed another four  blocks from Sue Garman’s “Friend’s of Baltimore” and they are ready to be stitched together into a row.  I already have one row stitched together.  You can read about that here.  When I cut my background blocks, I always cut them 2″ or 3″ larger than the finished size.  So, before I could stitch the blocks together, I had to trim them down to the correct size.  Here is what I did to make the job so easy and stress-free…The best part is, I never had to measure anything!

I made a window template  with the opening the exact measurement of the unfinished size of the block.  The finished size is 15″, so I needed to trim the blocks down to 15 1/2″, therefore I made the opening 15 1/2″.  (I hope that makes sense!)

trim 2 (1)

So now I could place the window template on the block and make sure that everything was centred nicely.

trim 4 (2)

Next, I traced around the opening with a marking pen.

trim 7

Then I trimmed the excess fabric away by cutting on the marked line.  Easy peasy!

trim 5

trim 6

So, once I trimmed all the blocks to the correct size, I started to stitch the blocks together in a row.

r rows (2)

Ta da!   An evening well spent!

r rows (1)

Til next time…

Kerry

Finish a block…start a block!

Darn it!  Does this ever happen to you?  I was stitching merrily along, when I thought my stitches felt a little weird.  Then I noticed my background had folded over on itself and I was stitching through two layers.  I keep my stitch ripper handy for occasions just like this!

stitch 2

So, once the block was finally finished, I did what I do to all my finished blocks….I gave it a bath!  I like to wash everything out of my block…like glue, starch and anything else that shouldn’t be there!  First, I fill the sink with very hot water and a bit of soap.

sink 1

Next, I take a very deep breath…and then I toss my block into the water.

sink 3

I usually let it soak for a couple of hours.  Then I let the water out of the sink and rinse the block under hot water until there are no more suds.

sink 4

Next, I gently squeeze the block so it is not dripping wet, but still fairly wet.  Finally, I spread the block out on a thick towel and pin the four corners.  Then I just let it air dry.  I should mention that I pre-wash all of my fabric in Synthrapol before even beginning the block.

sink 6

sink 7

So…while the block was drying, I started the next block of Civil War Bride.  First I traced the block…

cwb 1

….then I made lots of bias.  (You can never have too much bias!)

cwb 2

Oh!  And speaking of Civil War Bride, I finally made a decision.  I chose Nest #2!  Instead of putting 5 eggs in the nest just like the pattern, I chose to add 3 eggs…an egg to represent each one of my lovely children!

nest 7

Til next time….

Kerry

A Bit of Catch-up….

This block from Civil War Bride needed a butterfly in the bottom right hand corner before it could be considered “Officially Finished”.

bird block

However, I wanted to find a really interesting fabric for the wings.  A fabric  that would do the butterfly proud!  So I waited patiently.  Then, I came across this chunk of fabric in my stash.  (For those of you who are wondering, I am taking every bit of fabric for this quilt from my stash.)  I love this type of fabric!  The pattern repeat is symmetrical, rather than asymmetrical.  These fabrics are rare, so grab them when you find them!

fussy cut 3

This dark curly part caught my eye.

fussy cut 1

I cut the butterfly wings out of the fabric so that the wings would be mirror images of each other.  I placed the pattern so that the black curly part would be somewhere near the middle of the butterfly.  The beauty of doing this, is that you never really know what you will end up with!

fussy cut 2

And here is the proud butterfly!

DSCN3497

So once I got that off my mind, I continued on with my “Friends of Baltimore” block.  I added some buds, stems and leaves.  If you look closely, you will see that I used 2 different greens for the wreath and the stems.   (Between you and I, that was a bit of an oopsy on my part.  Mum’s the word!)

wreath 1

Then came the  flowers, complete with buds and centers.

wreath 3

Next, came a pretty little bow…

wreath 4

… and, FINALLY, a couple of love birds!

wreath 5

Til next time….

Kerry

Think Happy Spring Thoughts!

I looked out the window this morning and this is what I saw!  Yikes!

snow day

So, I thought  I better get busy and think some Happy Spring Thoughts!  The next block from The Civil War Bride inspired me to think Spring!

First, I started with the branches and a few little leaves.

block 1

Then I added more leaves.

a few leaves 2

…and some more!

more leaves 3

Next, I added the bird’s feet and the underbelly of the bird. (If you let your imagination run wild, it looks like a folk art kind of bird…but just wait…!)  I used Ultra-Suede for these tiny pieces because they are really….tiny!  When using Ultra-Suede, I just cut out the pieces without adding a seam allowance and stitch it in place.  Easy peasy!

feet and underbody 4

Next came the rest of the bird.

bird 4

Then, I auditioned a few nests.  Should I choose Nest #1…….

nest 5

….or Nest # 2?nest 6

Til next time….

Kerry

Lots of Leaves!

The block I am working on  from the Civil War Bride had a lot of leaves on it.

a few more leaves

Boredom was starting to set in, so thank goodness I had some emergency chocolate stashed away!

chocolate

I stitched a bit…ate a chocolate…stitched a bit…ate a chocolate…until finally all the leaves and flowers were stitched in place.

finished block

I was worried that my pink flower looked a little…well….pale.  It seemed to fade into the background.

insipid

So I carefully drew around the outer edge with a pink Sharpie marker.  Much better, I think!

marker

Til next time…

Kerry